iPhone on motorcycle?

I recently bought the Tom-Tom app for my iPhone; it's my first Sat-Nav and worked quite well stuffed inside my jacket pocket, giving turn-by-turn prompts to me over Bluetooth in my helmet. Less than ideal satellite visibility and not being able to see the additional info on the screen, prompted me to mount it on the bike.

My motorbike doesn't have a lot of cockpit space; no fairing or screen and not much room on the bars, so I didn't think the commercial (and expensive) bike mounts would be suitable. Most mounts I found only held the iPhone and offered no impact resistance or weather protection.

So I looked for a hack-together solution. I ordered an iDry waterproof iPhone case from Amazon, with the intention of making holes in it! I need a secure mounting and ideally be able to charge the phone while on the bike.

iDry waterproof case

It's not clear from the photo or the description that the screen cover is a silicon rubber, fine if it's wet, but difficult to pinch-zoom when it's dry. Not that I'm bothered; it'll be difficult enough with gloves on (more on that another time). I don't like the white either, but it doesn't come in any other colour, so I may have to paint it.

I'm not planning on submerging it, so if I'm careful, any holes I make shouldn't be a problem. Although it's also not clear, from either photo or description, if there was any kind of access port for the connector. There isn't. I'm not entirely sure how I'm going to get power into the box in a robust, weatherproof way. Let's get it mounted first, but I have to take account of the opening mechanism:

Operation

Old laptops

I had an old laptop that was chugging under XP and I was half thinking of using it for a future desktop fab project. A friend suggested and supplied a Ubuntu installation CD, which installed without hassle (I don't really have any Linux experience). It detected my Wi-Fi network and connected remarkably easily too (better than Windows). I've not had chance to look at it any closer yet.

I've also taken another old laptop off the hands of a colleague, "free to a good home" and it's running XP fairly well. It came with working wireless and I'm thinking of maybe turning it into a large digital picture frame.

So many projects, so little time...

Too good to last

Oh well, my Xbox died again. This time it's terminal. On the bright side; new ones come with a HDMI port and the new slim Elite was just announced at E3, so prices may come down a bit (yeah right!). I don't need a HDD or Wi-Fi (can use existing) so I can get away with the Arcade/Core or whatever it's called now.

I've been working some more on my Sci-Fi UAV flying thing recently. If you're interested, there's a link in the side-bar.

Zombie Xbox 360!

Oh yes! My Xbox is back from the dead; Red Ring of Death is no more!

I had previously stripped my Xbox, which is fun in itself, and borrowed a hot-air reflow blower from work. I removed both heatsinks and cleaned the old heat transfer compound off of the processors with cleaning solvent.

I had a large lump of aluminium round bar sitting on top of the GPU to hold it in place and put some downward pressure on it while I attempted to reflow it. After letting it cool, I refitted the heatsinks; I've only got some of the traditional white heat transfer paste, so I used it, instead of the silver original paste which is probably something similar to "Arctic Silver" or whatever it's called. I plugged in the power supply and AV cable, and powered-up... nothing; RRoD still smiling at me.

BTW the heatsink mod found on the net; didn't appeal to me because the alternative heatsink clamping method wouldn't put pressure in the centre, essentially allowing the PCB to flex and a gap to form between the top of the GPU and the H/S. The original x-spring clips have a centre "point" to prevent it. Also, the suggestion of running the GPU with no cooling or wrapping a towel around it or similar in order to heat the processor up enough to melt its own solder joints sounds like a sure-fire way to knacker it. If you don't kill it straight away, I'm sure you'd reduce its life.

I was deciding what to do with my dead Xbox, now that I couldn't save it. I was about to pack up the reflow gun, ready to take back to work, when I thought I might as well give it another go.

This time I left the H/S on and attempted to blow the hot air under the processor. I gave it a little bit of extra time, because of the H/S. I also thought I should do the CPU as well, it may not be (only) the GPU. Then I left it to cool.

Naked zombie Xbox on trial.

I dropped the drive back in, reconnected the leads and hit the power: the fans ramped to full power (the H/S were still very warm) and I was treated to the usual dance of green lights! As I type, it's been on for about 4 hours playing DVDs. The real test will be when I re-case it and hit it with a 9 hr gaming session!!!

The start of yet something else

Ok, so I created this "hub" as central place to upload info about what I'm working on, or planning to work on, that doesn't yet warrant its own blog. To explain; I'm already working on a functioning Sci-Fi model / VTOL UAV, I'm in the middle of animating a toy meerkat for work and I had to make some mods to my motorcycle helmet recently (links in the sidebar). On top of that I was given a 2 axis stepper driven linear table recently and thought it a great opportunity to look at creating my own CNC machine.

I can share info and photos here on the hub of stuff that may or may not go anywhere, and will link to my other stuff. Blogs are so much more convenient than my old website, that I had to use specific software, edit and upload via FTP, to use.

Anyway, enough rambling; I'm supposed to be doing my assignment :-/