Showing posts with label RRoD. Show all posts
Showing posts with label RRoD. Show all posts

Friday, 18 June 2010

Too good to last

Oh well, my Xbox died again. This time it's terminal. On the bright side; new ones come with a HDMI port and the new slim Elite was just announced at E3, so prices may come down a bit (yeah right!). I don't need a HDD or Wi-Fi (can use existing) so I can get away with the Arcade/Core or whatever it's called now.

I've been working some more on my Sci-Fi UAV flying thing recently. If you're interested, there's a link in the side-bar.

Sunday, 25 April 2010

Zombie Xbox 360!

Oh yes! My Xbox is back from the dead; Red Ring of Death is no more!

I had previously stripped my Xbox, which is fun in itself, and borrowed a hot-air reflow blower from work. I removed both heatsinks and cleaned the old heat transfer compound off of the processors with cleaning solvent.


I had a large lump of aluminium round bar sitting on top of the GPU to hold it in place and put some downward pressure on it while I attempted to reflow it. After letting it cool, I refitted the heatsinks; I've only got some of the traditional white heat transfer paste, so I used it, instead of the silver original paste which is probably something similar to "Arctic Silver" or whatever it's called. I plugged in the power supply and AV cable, and powered-up... nothing; RRoD still smiling at me.

BTW the heatsink mod found on the net; didn't appeal to me because the alternative heatsink clamping method wouldn't put pressure in the centre, essentially allowing the PCB to flex and a gap to form between the top of the GPU and the H/S. The original x-spring clips have a centre "point" to prevent it. Also, the suggestion of running the GPU with no cooling or wrapping a towel around it or similar in order to heat the processor up enough to melt its own solder joints sounds like a sure-fire way to knacker it. If you don't kill it straight away, I'm sure you'd reduce its life.

I was deciding what to do with my dead Xbox, now that I couldn't save it. I was about to pack up the reflow gun, ready to take back to work, when I thought I might as well give it another go.

This time I left the H/S on and attempted to blow the hot air under the processor. I gave it a little bit of extra time, because of the H/S. I also thought I should do the CPU as well, it may not be (only) the GPU. Then I left it to cool.

Naked zombie Xbox on trial.

I dropped the drive back in, reconnected the leads and hit the power: the fans ramped to full power (the H/S were still very warm) and I was treated to the usual dance of green lights! As I type, it's been on for about 4 hours playing DVDs. The real test will be when I re-case it and hit it with a 9 hr gaming session!!!